1. <rp id="ayi5k"><acronym id="ayi5k"><input id="ayi5k"></input></acronym></rp>
          <progress id="ayi5k"><track id="ayi5k"></track></progress> <tbody id="ayi5k"></tbody><dd id="ayi5k"><noscript id="ayi5k"></noscript></dd>

          1. <dd id="ayi5k"><track id="ayi5k"></track></dd><rp id="ayi5k"><object id="ayi5k"></object></rp>
            Yellow poplar
            Red Oak
            White Oak
            White Ash
            Hard Maple
            Soft Maple
            Sap Gum
              Home About us Our products Contact us
            Our products
            Other names:Peacock wood, yellow elm
            Distribution area:The United States east.

            Eastern USA.

            General description
            Hackberry is closely related to sugarberry (Celtis laevigata) and is a member of the elm family. There is little difference between sapwood and heartwood which is yellowish grey to light brown with yellow streaks. The wood is very susceptible to blue staining before and after kilning and has irregular grain, occasionally straight and sometimes interlocked, with a fine uniform texture.

            Working properties
            The wood planes and turns well and is intermediate in its ability to hold nails and screws, and stains and polishes satisfactorily. Hackberry dries readily with minimal degrade. It has a fairly high shrinkage and may be susceptible to movement in performance.
            Physical properties
            Hackberry is moderately hard, heavy and has medium bending strength, high shock resistance but is low in stiffness. It has a good steam bending classification.

            Specific Gravity: 0.53 (12% M.C.)
            Average Weight: 593 kg/m3 (12% M.C.)
            Average Volumetric Shrinkage: 13.5% (Green to 6% M.C.)
            Modulus of Elasticity: 8205 MPa
            Hardness: 3914 N

            Non-resistant to heartwood decay. Liable to attack by forest longhorn and Buprestid beetle. The heartwood is moderately resistant to preservative treatment but the sapwood is permeable.

            USA: Reasonable in lumber but mainly in the thinner standard thicknesses, and lower grades.
            Export: Limited due to low demand, and concerns about internal staining.

            Main uses
            Furniture and kitchen cabinets, joinery, doors and mouldings.